Volkswagen Mark IV Forum banner
1 - 18 of 18 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
prob not very accurate but its a bit of fun anyway. http://www.letstorquebhp.com/calculator.asp bora 1.8t wieght is 1305 not sure of any others.

heres mine

Power at Flywheel (BHP) : 150
Weight without Driver (KG) : 1305
Power to Weight Ratio (BHP Per Ton) : 116.79
0 - 60 (Secs) : 8.94
0 - 100 (Secs) : 26.47
60 - 100 (Secs) : 17.54
Quarter Mile (Secs) : 17.39
Terminal Speed (MPH) : 81.04
Drag Strip Quarter Mile (Secs) : 17.19
Drag Strip Terminal Speed (MPH) : 82.39
 

·
Registered
Joined
·
4,686 Posts
Seen it before but good fun!

Power at Flywheel (BHP) : 231
Weight without Driver (KG) : 1405
Power to Weight Ratio (BHP Per Ton) : 167.05
0 - 60 (Secs) : 6.10
0 - 100 (Secs) : 16.58
60 - 100 (Secs) : 10.18
Quarter Mile (Secs) : 14.79
Terminal Speed (MPH) : 94.36
Drag Strip Quarter Mile (Secs) : 14.65
Drag Strip Terminal Speed (MPH) : 95.49
 

·
Registered
Joined
·
30 Posts
My old car (clio 16v/williams hybrid)

Power at Flywheel (BHP) : 170
Weight without Driver (KG) : 960
Power to Weight Ratio (BHP Per Ton) : 179.93
0 - 60 (Secs) : 6.20
0 - 100 (Secs) : 16.06
60 - 100 (Secs) : 9.87
Quarter Mile (Secs) : 14.63
Terminal Speed (MPH) : 95.42
Drag Strip Quarter Mile (Secs) : 14.43
Drag Strip Terminal Speed (MPH) : 97.13

Not going to put what my lard arse golf does lol.
 

·
Registered
Joined
·
2,174 Posts
Power at Flywheel (BHP) : 270
Weight without Driver (KG) : 1500
Power to Weight Ratio (BHP Per Ton) : 182.89
0 - 60 (Secs) : 5.43
0 - 100 (Secs) : 14.68
60 - 100 (Secs) : 9.25
Quarter Mile (Secs) : 14.16
Terminal Speed (MPH) : 98.20
Drag Strip Quarter Mile (Secs) : 13.76
Drag Strip Terminal Speed (MPH) : 101.25
 

·
Registered
Joined
·
74 Posts
Power at Flywheel (BHP) : 300
Weight without Driver (KG) : 1405
Power to Weight Ratio (BHP Per Ton) : 216.95
0 - 60 (Secs) : 4.65
0 - 100 (Secs) : 12.26
60 - 100 (Secs) : 7.60
Quarter Mile (Secs) : 13.35
Terminal Speed (MPH) : 104.37
Drag Strip Quarter Mile (Secs) : 12.95
Drag Strip Terminal Speed (MPH) : 107.74

Wish mine was as quick as it works out. [:D]

Dont know the weight so guessed it could be little out.
 

·
Registered
Joined
·
131 Posts
Power at Flywheel (BHP) : 230
Weight without Driver (KG) : 1236
Power to Weight Ratio (BHP Per Ton) : 189.07
0 - 60 (Secs) : 5.91
0 - 100 (Secs) : 14.47
60 - 100 (Secs) : 8.56
Quarter Mile (Secs) : 14.28
Terminal Speed (MPH) : 99.34
Drag Strip Quarter Mile (Secs) : 14.08
Drag Strip Terminal Speed (MPH) : 101.10

I also wish mine was this quick! although i guess i may just be used to the KO3s and CC2 map now! Maybe its time for IHI? Or maybe an R, with that lovely bi-turbo package....if only!!!
 

·
Registered
Joined
·
131 Posts
Just out of interest this is what the EIP Tuning Bi-Turbo R32 works out as......!!!

Power at Flywheel (BHP) : 600
Weight without Driver (KG) : 1447
Power to Weight Ratio (BHP Per Ton) : 421.31
0 - 60 (Secs) : 2.93
0 - 100 (Secs) : 6.70
60 - 100 (Secs) : 3.78
Quarter Mile (Secs) : 11.33
Terminal Speed (MPH) : 129.97
Drag Strip Quarter Mile (Secs) : 10.93
Drag Strip Terminal Speed (MPH) :

134.48


That is standard Rs weight, not sure what the EIP is after rollcage and all the extras. This is just a guesstimate.
 

·
Super Moderator
Joined
·
15,990 Posts
Power at Flywheel (BHP) : 185
Weight without Driver (KG) : 1451
Power to Weight Ratio (BHP Per Ton) : 129.55
0 - 60 (Secs) : 8.12
0 - 100 (Secs) : 22.42
60 - 100 (Secs) : 14.30
Quarter Mile (Secs) : 16.53
Terminal Speed (MPH) : 85.87
Drag Strip Quarter Mile (Secs) : 16.33
Drag Strip Terminal Speed (MPH) : 87.31

if i'd done hybrid turbo and full exhaust

Power at Flywheel (BHP) : 220
Weight without Driver (KG) : 1451
Power to Weight Ratio (BHP Per Ton) : 154.05
0 - 60 (Secs) : 6.96
0 - 100 (Secs) : 17.79
60 - 100 (Secs) : 10.83
Quarter Mile (Secs) : 15.34
Terminal Speed (MPH) : 92.87
Drag Strip Quarter Mile (Secs) : 15.14
Drag Strip Terminal Speed (MPH) : 94.46

thats more like it[:'(]
 

·
Registered
Joined
·
412 Posts
Have to agree it's not very accurate, although I wish it were...

Power at Flywheel (BHP) : 265
Weight without Driver (KG) : 1300
Power to Weight Ratio (BHP Per Ton) : 207.12
0 - 60 (Secs) : 4.85
0 - 100 (Secs) : 13.12
60 - 100 (Secs) : 8.27
Quarter Mile (Secs) : 13.58
Terminal Speed (MPH) : 101.75
Drag Strip Quarter Mile (Secs) : 13.18
Drag Strip Terminal Speed (MPH) : 105.03
 

·
I ain't no effin padawan
Joined
·
1,429 Posts
Power at Flywheel (BHP) : 320
Weight without Driver (KG) : 1300
Power to Weight Ratio (BHP Per Ton) : 250.11
0 - 60 (Secs) : 4.87
0 - 100 (Secs) : 10.94
60 - 100 (Secs) : 6.07
Quarter Mile (Secs) : 13.15
Terminal Speed (MPH) : 109.65
Drag Strip Quarter Mile (Secs) : 12.95
Drag Strip Terminal Speed (MPH) :

111.64


I'd say it's nit far off. I don't think I caould match the 0-60, but the 60-100 is prety close, and the 1/4 mile terminal is spot on. I repeatedly get 109-110mph terminals at the pod. If I could drive, the et's would be close too.
 
1 - 18 of 18 Posts
Top