Volkswagen Mark IV Forum banner
1 - 20 of 27 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter · #1 ·
Hiya!

How much is it for the Kit named above for a Golf MARK 4 gt-tdi150 retuned to 175bhp?

How much is it for fitting, please?
 

·
Registered
Joined
·
3,640 Posts
Hi Mate

The kit is ?305.00 + VAT

Fitting is ?167.50 + VAT

We are selling loads of these at the moment as the price is excellent and so are the parts

Hope that helps

If I can help you further please feel free to give me a shout back

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #3 ·
Hi Mate

The kit is ?305.00 + VAT

Fitting is ?167.50 + VAT

We are selling loads of these at the moment as the price is excellent and so are the parts

Hope that helps

If I can help you further please feel free to give me a shout back

Sarah
Thanks for the prompt reply, whats it like with service shop how busy are you?
 

·
Registered
Joined
·
3,640 Posts
Hi

The workshop at the moment is looking good for Monday , Tuesday , Thursday and Friday next week.

We can get the parts for then too

Hope that helps you

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #5 ·
Hi

The workshop at the moment is looking good for Monday , Tuesday , Thursday and Friday next week.

We can get the parts for then too

Hope that helps you

Sarah
Will be in touch (Just waiting for a debt to be paid to moi!), can I just pick your brains on summat else whilst I am here.....

A.) I have had a tuning box fitted to my car (dieselpower +, from bhp+.). I can feel the power in driving, but not tested it on a roller, is it poss whilst I am there? And also can you fine tune it further, if so how much?

B.) How much would a new Milltek exhasut system cost fitted to my car, please bear in mind I want this mod to increase bhp/tourque (i believe you people are the experts in advice, kudos!cat back etc), and also would like no mods to my bumper!

Thankyou!
 

·
Registered
Joined
·
3,640 Posts
Hi

Sorry

Yes we can put it on the rolling road while it is here.

This would be ?60.00 + VAT for the power runsfor the normale price.If you do the exhaust at the same time , then we will do it at ?45.00 + VAT

We cannot do tuning with these though I am afraid as we would need the info from the diselpower+ company to do it and we are not a supplier

The price of the exhaust depends on if you wanted a resonated or non resonated system.

Non res fitted would be ?288.82 + VAT

Resonated fitted would be ?300.15 + VAT

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #7 ·
Hi

Sorry

Yes we can put it on the rolling road while it is here.

This would be ?60.00 + VAT for the power runsfor the normale price.If you do the exhaust at the same time , then we will do it at ?45.00 + VAT

We cannot do tuning with these though I am afraid as we would need the info from the diselpower+ company to do it and we are not a supplier

The price of the exhaust depends on if you wanted a resonated or non resonated system.

Non res fitted would be ?288.82 + VAT

Resonated fitted would be ?300.15 + VAT

Sarah
Man you must get round to replying to loads all day long!

Whats the difference in theNon res and Res?, plus what kind of gains am I looking at? Plus is it true u can lose bhp gains from some exhaust systems?(Hope thats not the one I am looking at?)....lol
 

·
Registered
Joined
·
3,640 Posts
Yes I do get quite a few to do.

I go on to Seat Cupra.net , Briskoda and a few mor forums too.

Plus I still do the phone calls [:D] but love the job

The differnces with the system is that you can hear the resonated outside and not inside.

The non resonated you can hear outside and inside

It is mainly down to the downpipes that you can loose the gains with exhausts.

It is due to back pressures etc

Sorry need a brew I am slacking a bit with the technical terms , but the exhaust you find that will be about 8 - 10bhp

So you will be ok with the one you want

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #9 ·
Yes I do get quite a few to do.

I go on to Seat Cupra.net , Briskoda and a few mor forums too.

Plus I still do the phone calls [:D] but love the job

The differnces with the system is that you can hear the resonated outside and not inside.

The non resonated you can hear outside and inside

It is mainly down to the downpipes that you can loose the gains with exhausts.

It is due to back pressures etc

Sorry need a brew I am slacking a bit with the technical terms , but the exhaust you find that will be about 8 - 10bhp

So you will be ok with the one you want

Sarah
Sorry to be a pain, whilst mulling over the above I am tempted to do the APR REMAP aswell, taking the tuning box out, (if anyone intrested in it giz a showt!!I paid 350.00 gbp, inc reciept). I was wondering if you can shed any light for my vehicle, and also about the switch?????

Also million dollar question you have tyo give me a good discount if I get all of it done at the same time please, come on have a word with your boss.I am also looking at ther K&N induction kit.......
 

·
Registered
Joined
·
3,640 Posts
Hi Mate

Dont worry about being a pain.

As for APR , they only do the petrol engines I am afraid.

We do the Tunit box for your car.

Is this something like what you have already?

As for discounts , are prices are at the moment so low , we are not able to do any more discount on the Koni kits.

Sorry

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #11 ·
I am confused now, What is this on your website?


We offer the Dual System remap for the turbo diesel engines. The unit conists of a small box that slots into the diagnostic port in the dash, with a click of a button it retrieves the standard software from the cars ECU, then another press of a button downloads a modified map in its place and can be switched back over to revert to standard - Vigerous hardly begins to describe the enhanced performance...

TitlePrice1.9 TDI PD - 100-130 BHP (320 NM Torque) Upgrade ?495
1.9 TDI PD - 115-148 BHP (363 NM Torque) Upgrade ?495
1.9 TDI PD - 130-172 BHP (378 NM Torque) Upgrade ?495
1.9 TDI PD - 150-185 BHP (390 NM Torque) Upgrade ?495

[TR]
[TR]
 

·
Registered
Joined
·
3,640 Posts
Hi

That is the Dual System.

Sorry.

We do not do the Dual system any more I am afraid.

We do the IPRO remaps or the Tunit boxes

The IPRO remap will take your 150 to 185bhp , this is a lovely smooth map too.

Which tuning box do you have?

Sarah
 

·
Registered
Joined
·
3,640 Posts
Hi

The remap for this car would take it to 185bhp.

So this is 5bhp more than the tuning box that you have now.

We have had a 150PD on our rollers and he returned just shy of 200bhp with the Tunit box that we do.

These are didgital and have the ability to have lap top tuning on these.

So you pays your money and takes your choice with the box or the remap.

Box is removable and will go on all the PD engines or remap is specific to the car and ECU and is not removable , unless you go for the same car with the same ECU

I am afraid the parts that your requiring we cannot do anything deal wise as these are bits that are reduced in price to the maximum

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #15 ·
a.)Which remap would it be?(Make, plus bhp/tourque output with and without new exhaust and induction).

b.)The figure I quoted would be based on a guess, as the car has no probs against Civic Type R. (cOULD BE WRONG)

c.)What output on the tunit box with and without exhaust and induction,

d.)Can you also give me a total cost/quote for: (Sorry, as it has been dragged on now).

1.)Suspension (As discussed above).

2.)Milltek exhaust decat performance full system.

3.)k&n Induction Kit

4.)Remap

5.)Rollers.

I know you will have tried your best for the discount, thanx.......
 

·
Registered
Joined
·
3,640 Posts
Hi

The remap is the IPRO one

This would give you 185bhp and retails for ?398.00 + VAT

It would be very difficult to give a definate bhp with the exhaust , but it could be around the 10 - 15bhp

Suspension ?305.00 + VAT

Fitting ?167.50 + VAT

Exhaust with decat pipe ?366.93 + VAT

Fitting ?135.00 + VAT max could go down

The K & N induction ?76.00 + VAT

Fitting max ?45.00 + VAT

We will do you a good price on the rolling road afterwards at ?45.00 + VAT

Is that ok?

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #17 ·
Hi

The remap is the IPRO one

This would give you 185bhp and retails for ?398.00 + VAT

It would be very difficult to give a definate bhp with the exhaust , but it could be around the 10 - 15bhp

Suspension ?305.00 + VAT

Fitting ?167.50 + VAT

Exhaust with decat pipe ?366.93 + VAT

Fitting ?135.00 + VAT max could go down

The K & N induction ?76.00 + VAT

Fitting max ?45.00 + VAT

We will do you a good price on the rolling road afterwards at ?45.00 + VAT

Is that ok?

Sarah
Thought I would give you a days break, right so what dates are available again?
 

·
Registered
Joined
·
3,640 Posts
Just 1 day? ha ha ha

I need a week after all that [;)]

Sorry only joking

We will be looking at wed , thurs , fri next week.

I will need a couple o days to get the bits in for you.

Or monday on any day from the 21st on

We are closed for the bank holiday weekend the 26th and 28th

Hope that helps

When you have your day you could give me a call and I can take your details from you , that would be great.

My number is 0161 7760777 option 1

Sarah
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #19 ·
Just 1 day? ha ha ha

I need a week after all that [;)]

Sorry only joking

We will be looking at wed , thurs , fri next week.

I will need a couple o days to get the bits in for you.

Or monday on any day from the 21st on

We are closed for the bank holiday weekend the 26th and 28th

Hope that helps

When you have your day you could give me a call and I can take your details from you , that would be great.

My number is 0161 7760777 option 1

Sarah
Hiya, just to confirm are we still OK for Wednesday? And can you email me a quote pls? Can I get it invoiced to my business?
 
1 - 20 of 27 Posts
Top